
Basic Data: Model Number P-R266A-EN BTU Rating 266,000 Indoor Stack Diameter 7" Voltage 120 / 240V Water Connection 2" CPVC connection Gas Connection 3/4" Max Altitude 2000 Ft. Reduce input 4% for each 1,000 ft (305 m) above sea level, as high elevation reduces combustion performance.
Please refer to Warranty Information card under Manuals section
This heater is a great fit for medium to large in-ground pools, typically between 15,000 and 25,000 gallons. That’s roughly the size of a 16' x 32' up to about an 18' x 36' rectangular pool, depending on depth. It’s powerful enough to heat your water efficiently, even in cooler weather.
Yes, it’s automation compatible. You can hook it up to systems like Hayward, Pentair, or Jandy controllers and manage your pool heat through your main control panel or app (depending on the system).
It’s pretty straightforward. The digital control panel lets you set your temp, turn it on/off, and run diagnostics if anything goes off. Most folks get the hang of it quickly, even without the manual.
It’s a popular pick in colder climates, including here in Canada. It’s built to handle cooler air temps, and with proper insulation and setup, it’ll reliably heat your pool early spring through late fall.
You can, but it needs a special indoor venting kit and proper clearance. You’ll also need to follow local building codes. If you’re not sure, talk to a licensed gas tech before installing it inside.
Looks like there’s nothing in your cart.
We can help with that.