pH Up Water Balancer

Use our granular pH Up to increase the pH level of your pool or spa! Maintaining a proper pH level in your pool/spa water is vital for keeping the water clean and safe for use. If your pH level is too high, it can also reduce the effectiveness of the chlorine causing another problem entirely. Many variables affect the pH level in your water. Pool usage, rain, animal droppings, etc all have an effect on your waters pH level. This is why it is important to test a minimum of every 3 - 4 days.

Key Features:

• 100% sodium carbonate.

• Corrects acidic water conditions.

• Slows the rapid dissipation of chlorine caused by acidic water.

• Reduces eye irritation by reducing acidity.

• Reduces corrosion of pool equipment

• Our pool pH increaser comes in granular form- available in multiple sizes

• Soluble in cold water

• Helps maintain the optimal pH level for pool and spa water between 7.2 and 7.6 ppm.

• Available in 3 sizes to suit your needs! (500 grams, 2 KG, 8 KG)

TO RAISE pH LEVEL:

• Test water to calculate how much pH UP is necessary

• Mix pH up with water and add to pool

• Adding pH Up will help raise your pH level to land in the desired range. It is best that you add a little bit at a time and then test your pH level accordingly. Do this until you have reached the desired amount.

READ THE LABEL BEFORE USING:
pH Up is used to raise the pH for safe swimming. The ideal range for 7.6. High acidity (low pH) causes eye irritation and rapid chlorine loss.

DIRECTIONS:

• Sprinkle pH Up over surface of pool, circulate 30 minutes, re-test and treat again if necessary.

• Recommended amount of pH Up to use to raise pH to 7.2 to 7.6 per 10,000 liters.

  pH 10,000 litres

  6.8 - 7.2 75 g

  6.5 - 6.8 100 g

  Below 6.5 125 g

PRECAUTIONS:

• KEEP OUT OF REACH OF CHILDREN.

• Causes eye and skin irritation.

• Harmful if swallowed.

• Avoid contact with skin, eyes or clothing.

• Do not breathe fumes.

• Do not mix this product with any other chemical.